- Podman - Podman List Archives

regression after update to podman v5
by Leon Fauster 20 Nov '24

20 Nov '24

Hi all, RHEL9.5 is GA and with this release also podman and friends got updates. podman-4.9.4 -> 5.2.2 Since then, I have a couple of rootless containers that have problems with their volumes. The minimal example is as follows: $ cat Containerfile FROM fedora:41 USER 1000:1000 ENV HOME=/data WORKDIR /data VOLUME ["/data"] So, when started, the volume (as specified in the file) will be created automatically. With podmam 4.9 podman run --rm -ti --userns=keep-id:uid=1000,gid=1000 \ localhost/test:latest ls -la /data drwxr-xr-x. 2 1000 1000 4096 Nov 20 12:44 . dr-xr-xr-x. 1 root root 4096 Nov 20 12:44 .. shows that the volume is mounted in the container with the USER id. This works so far for my workload. With podmam 5.2 podman run --rm -ti --userns=keep-id:uid=1000,gid=1000 \ localhost/test:latest ls -la /data drwxr-xr-x. 2 999 999 4096 Nov 20 12:11 . dr-xr-xr-x. 1 root root 4096 Nov 20 12:46 .. shows that the volume is mounted in the container with (USER id - 1). The user can not write to the folder and the container fails to operate. Forcing to use a named volume for overlay podman v5 shows the same output but when the destination is changed to a different directory (/side), it gets the right owner set: podman run --rm -ti --userns=keep-id:uid=1000,gid=1000 \ -v ${RANDOM}:/side localhost:8085/shee/test:latest ls -la /side drwxr-xr-x. 2 1000 1000 4096 Nov 20 12:51 . dr-xr-xr-x. 1 root root 4096 Nov 20 12:51 .. I read the changelogs but didn't find any hints for a solution. I would appreciate any feedback, thanks! -- Leon

1 1

disk space below ~/.local/share/containers/storage/overlay
by Matthias Apitz 15 Nov '24

15 Nov '24

After stop of a container massive data remains below ~/.local/share/containers/storage/overlay Steps to reproduce: cups@srap57dxr1:~> podman image list REPOSITORY TAG IMAGE ID CREATED SIZE localhost/sles15-sp6-v73-sp1 latest caeabd52aa4a 46 hours ago 26 GB localhost/sles15-sp6-v73 latest 690f90eaed0f 46 hours ago 20.2 GB registry.suse.com/bci/bci-base 15.6 075e3ce8c342 11 days ago 125 MB cups@srap57dxr1:~> podman run --tz='Europe/Berlin' -d -p 2022:22 sles15-sp6-v73 cups@srap57dxr1:~> podman container list CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 43e7d4f12f27 localhost/sles15-sp6-v73:latest 10 minutes ago Up 10 minutes 0.0.0.0:2022->22/tcp gracious_sinoussi This start creates two new dirs below /home/cups/.local/share/containers/storage/overlay: srap57dxr1:/home/cups/.local/share/containers/storage/overlay # ls -ltr | tail -2 drwxr-xr-x 2 cups root 17408 Nov 13 11:14 l drwx------ 6 cups root 1024 Nov 13 11:14 fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba srap57dxr1:/home/cups/.local/share/containers/storage/overlay # du -sh fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba 5.4G fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba Now I kill the container with: cups@srap57dxr1:~> podman kill 43e7d4f12f27 43e7d4f12f27 The dirs remain: srap57dxr1:/home/cups/.local/share/containers/storage/overlay # ls -ltr | tail -2 drwxr-xr-x 2 cups root 17408 Nov 13 11:14 l drwx------ 5 cups root 1024 Nov 13 11:27 fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba and occupy ~5.4G space: srap57dxr1:/home/cups/.local/share/containers/storage/overlay # du -sh fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba 5.4G fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba and this on any start/stop of the container. I did a closer look what is there below such a directory. We use such containers to test the update of our server software to the next release. Such update brings ~1 GByte gzip'ed packages and files and below such a directory is exactly what was updated, binary identical with what was stored as new versions of the files, for example a new delivered file '/opt/lib/sisis/etc/pos.rc' is there as fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba/diff/opt/lib/sisis/etc/pos.rc like many other files: # find fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba | grep /opt/lib/sisis | wc -l 2494 # find fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba | grep /usr/local/sisis-pap | wc -l 27879 Questions: 1) Why this data remains after stop of container? 2) Can I just remove this directory with 'rm -r ....'? 3) I did a test and renamed such directory to xxxx.away fb646bf8e1eb6f157c8b2430897df11da78a9e7c0e38858959066d5c40a2adba.away No error message showed up on next start. Any hits on this? Thanks -- Matthias Apitz, ✉ guru(a)unixarea.de, http://www.unixarea.de/ +49-176-38902045 Public GnuPG key: http://www.unixarea.de/key.pub Annalena Baerbock: "We are fighting a war against Russia ..." (25.1.2023) I, Matthias, I am not at war with Russia. Я не воюю с Россией. Ich bin nicht im Krieg mit Russland.

3 4

Podman v5.3.0 Released
by Do Not Reply 13 Nov '24

13 Nov '24

Hi all, Podman v5.3.0 is now available. You may view the full details at https://github.com/containers/podman/releases/tag/v5.3.0 Release Notes: -------------- ### Features - The `podman kube generate` and `podman kube play` commands can now create and run Kubernetes Job YAML ([#17011](https://github.com/containers/podman/issues/17011)). - The `podman kube generate` command now includes information on the user namespaces for pods and containers in generated YAML. The `podman kube play` command uses this information to duplicate the user namespace configuration when creating new pods based on the YAML. - The `podman kube play` command now supports Kubernetes volumes of type image ([#23775](https://github.com/containers/podman/issues/23775)). - The service name of systemd units generated by Quadlet can now be set with the `ServiceName` key in all supported Quadlet files ([#23414](https://github.com/containers/podman/issues/23414)). - Quadlets can now disable their implicit dependency on `network-online.target` via a new key, `DefaultDependencies`, supported by all Quadlet files ([#24193](https://github.com/containers/podman/issues/24193)). - Quadlet `.container` and `.pod` files now support a new key, `AddHost`, to add hosts to the container or pod. - The `PublishPort` key in Quadlet `.container` and `.pod` files can now accept variables in its value ([#24081](https://github.com/containers/podman/issues/24081)). - Quadlet `.container` files now support two new keys, `CgroupsMode` and `StartWithPod`, to configure cgroups for the container and whether the container will be started with the pod it is part of ([#23664](https://github.com/containers/podman/issues/23664) and [#24401](https://github.com/containers/podman/issues/24401)). - Quadlet `.container` files can now use the network of another container by specifying the `.container` file of the container to share with in the `Network` key. - Quadlet `.container` files can now mount images managed by `.image` files into the container by using the `Mount=type=image` key with a `.image` target. - Quadlet `.pod` files now support six new keys, `DNS`, `DNSOption`, `DNSSearch`, `IP`, `IP6`, and `UserNS`, to configure DNS, static IPs, and user namespace settings for the pod ([#23692](https://github.com/containers/podman/issues/23692)). - Quadlet `.image` files can now give an image multiple times by specifying the `ImageTag` key multiple times ([#23781](https://github.com/containers/podman/issues/23781)). - Quadlets can now be placed in the `/run/containers/systemd` directory as well as existing directories like `$HOME/containers/systemd` and `/etc/containers/systemd/users`. - Quadlet now properly handles subdirectories of a unit directory being a symlink ([#23755](https://github.com/containers/podman/issues/23755)). - The `podman manifest inspect` command now includes the manifest's annotations in its output. - The output of the `podman inspect` command for containers now includes a new field, `HostConfig.AutoRemoveImage`, which shows whether a container was created with the `--rmi` option set. - The output of the `podman inspect` command for containers now includes a new field, `Config.ExposedPorts`, which includes all exposed ports from the container, improving Docker compatibility. - The output of the `podman inspect` command for containers now includes a new field, `Config.StartupHealthCheck`, which shows the container's startup healthcheck configuration. - The output of the `podman inspect` command for containers now includes a new field in `Mounts`, `SubPath`, which contains any subpath set for image or named volumes. - The `podman machine list` command now supports a new option, `--all-providers`, which lists machines from all supported VM providers, not just the one currently in use. - VMs run by `podman machine` on Windows will now provide API access by exposing a Unix socket on the host filesystem which forwards into the VM ([#23408](https://github.com/containers/podman/issues/23408)). - The `podman buildx prune` and `podman image prune` commands now support a new option, `--build-cache`, which will also clean the build cache. - The Windows installer has a new radio button to select virtualization provider (WSLv2 or Hyper-V). - The `--add-host` option to `podman create`, `podman run`, and `podman pod create` now supports specifying multiple hostnames, semicolon-separated (e.g. `podman run --add-host test1;test2:192.168.1.1`) ([#23770](https://github.com/containers/podman/issues/23770)). - The `podman run` and `podman create` commands now support three new options for configuring healthcheck logging: `--health-log-destination` (specify where logs are stored), `--health-max-log-count` (specify how many healthchecks worth of logs are stored), and `--health-max-log-size` (specify the maximum size of the healthcheck log). ### Changes - Podman now uses the Pasta `--map-guest-addr` option by default which is used for the `host.containers.internal` entry in `/etc/hosts` to allow containers to reach the host by default ([#19213](https://github.com/containers/podman/issues/19213)). - The names of the infra containers of pods created by Quadlet are changed to the pod name suffixed with `-infra` ([#23665](https://github.com/containers/podman/issues/23665)). - The `podman system connection add` command now respects HTTP path prefixes specified with `tcp://` URLs. - Proxy environment variables (e.g. `https_proxy`) declared in `containers.conf` no longer escape special characters in their values when used with `podman machine` VMs ([#23277](https://github.com/containers/podman/issues/23277)). - The `podman images --sort=repository` command now also sorts by image tag as well, guaranteeing deterministic output ordering ([#23803](https://github.com/containers/podman/issues/23803)). - When a user has a rootless `podman machine` VM running and second rootful `podman machine` VM initialized, and the rootless VM is removed, the connection to the second, rootful machine now becomes the default as expected ([#22577](https://github.com/containers/podman/issues/22577)). - Environment variable secrets are no longer contained in the output of `podman inspect` on a container the secret is used in ([#23788](https://github.com/containers/podman/issues/23788)). - Podman no longer exits 0 on SIGTERM by default. - Podman no longer explicitly sets rlimits to their default value, as this could lower the actual value available to containers if it had been set higher previously. - Quadlet user units now correctly wait for the network to be ready to use via a new service, `podman-user-wait-network-online.service`, instead of the user session's nonfunctional `network-online.target`. - Exposed ports in the output of `podman ps` are now correctly grouped and deduplicated when they are also published ([#23317](https://github.com/containers/podman/issues/23317)). - Quadlet build units no longer use `RemainAfterExit=yes` by default. ### Bugfixes - Fixed a bug where the `--build-context` option to `podman build` did not function properly on Windows, breaking compatibility with Visual Studio Dev Containers ([#17313](https://github.com/containers/podman/issues/17313)). - Fixed a bug where Quadlet would generate bad arguments to Podman if the `SecurityLabelDisable` or `SecurityLabelNested` keys were used ([#23432](https://github.com/containers/podman/issues/23432)). - Fixed a bug where the `PODMAN_COMPOSE_WARNING_LOGS` environment variable did not suppress warnings printed by `podman compose` that it was redirecting to an external provider. - Fixed a bug where, if the `podman container cleanup` command was run on a container in the process of being removed, an error could be printed. - Fixed a bug where rootless Quadlet units placed in `/etc/containers/systemd/users/` would be loaded for root as well when `/etc/containers/systemd` was a symlink ([#23483](https://github.com/containers/podman/issues/23483)). - Fixed a bug where the remote Podman client's `podman stop` command would, if called with `--cidfile` pointing to a non-existent file and the `--ignore` option set, stop all containers ([#23554](https://github.com/containers/podman/issues/23554)). - Fixed a bug where the `podman wait` would only exit only after 20 second when run on a container which rapidly exits and is then restarted by the `on-failure` restart policy. - Fixed a bug where `podman volume rm` and `podman run -v` could deadlock when run simultaneously on the same volume ([#23613](https://github.com/containers/podman/issues/23613)). - Fixed a bug where running `podman mount` on a container in the process of being created could cause a nonsensical error indicating the container already existed ([#23637](https://github.com/containers/podman/issues/23637)). - Fixed a bug where the `podman stop` command could deadlock when run on containers with very large annotations ([#22246](https://github.com/containers/podman/issues/22246)). - Fixed a bug where the `podman machine stop` command could segfault on Mac when a VM failed to stop gracefully ([#23654](https://github.com/containers/podman/issues/23654)). - Fixed a bug where the `podman stop` command would not ensure containers created with `--rm` were removed when it exited ([#22852](https://github.com/containers/podman/issues/22852)). - Fixed a bug where the `--rmi` option to `podman run` did not function correctly with detached containers. - Fixed a bug where running `podman inspect` on a container on FreeBSD would emit an incorrect value for the `HostConfig.Device` field, breaking compatibility with the Ansible Podman module. - Fixed a bug where rootless Podman could fail to start containers using the `--cgroup-parent` option ([#23780](https://github.com/containers/podman/issues/23780)). - Fixed a bug where the `podman build -v` command did not properly handle Windows paths passed as the host directory. - Fixed a bug where Podman could leak network namespace files if it was interrupted while creating a network namespace ([#24044](https://github.com/containers/podman/issues/24044)). - Fixed a bug where the remote Podman client's `podman run` command could sometimes fail to retrieve a container's exit code for containers run with the `--rm` option. - Fixed a bug where `podman machine` on Windows could fail to run VMs for certain usernames containing special characters. - Fixed a bug where Quadlet would reject `RemapUsers=keep-id` when run as root. - Fixed a bug where XFS quotas on volumes were not unique, meaning that all volumes using a quota shared the same maximum size and inodes (set by the most recent volume with a quota to be created). - Fixed a bug where `Service` section of Quadlet files would only use defaults and not respect user input ([#24322](https://github.com/containers/podman/issues/24322)). - Fixed a bug where `podman volume ls` would sometimes fail when a volume was removed at the same time it was run. - Fixed a bug where the `--tz=local` option could not be used when the `TZDIR` environment variable was set. ### API - The Play API for Kubernetes YAML now supports `application/x-tar` compressed context directories ([#24015](https://github.com/containers/podman/pull/24015)). - Fixed a bug in the Attach API for Containers (for both Compat and Libpod endpoints) which could cause inconsistent failures due to a race condition ([#23757](https://github.com/containers/podman/issues/23757)). - Fixed a bug where the output for the Compat Top API for Containers did not properly split the output into an array ([#23981](https://github.com/containers/podman/issues/23981)). - Fixed a bug where the Info API could fail when running `podman system service` via a socket-activated systemd service ([#24152](https://github.com/containers/podman/issues/24152)). - Fixed a bug where the Events and Logs endpoints for Containers now send status codes immediately, as opposed to when the first event or log line is sent ([#23712](https://github.com/containers/podman/issues/23712)). ### Misc - Podman now requires Golang 1.22 or higher to build. - The output of `podman machine start` has been improved when trying to start a machine when another is already running ([#23436](https://github.com/containers/podman/issues/23436)). - Quadlet will no longer log spurious ENOENT errors when resolving unit directories ([#23620](https://github.com/containers/podman/issues/23620)). - The Docker alias shell script will now also honor the presence of `$XDG_CONFIG_HOME/containers/nodocker` when considering whether it should print its warning message that Podman is in use. - The podman-auto-update systemd unit files have been moved into the `contrib/systemd/system` directory in the repo for consistency with our other unit files. - Updated Buildah to v1.38.0 - Updated the containers/common library to v0.61.0 - Updated the containers/storage library to v1.56.0 - Updated the containers/image library to v5.33.0 This message was generated by an automated system. Replies to the sender will bounce, be ignored and discarded.

1 0

inspect processes in a container with lsof, strace, ...
by Matthias Apitz 13 Nov '24

13 Nov '24

Hello, We have containers with SuSE Linux SLES 15 SP6 and detected the following issue: We can not inspect processes as user root, for example: ebe6737da6e8:~ # ps ax | tail -3 10924 ? Ss 0:00 postgres: sisis sisis 127.0.0.1(35456) idle 11037 pts/0 R+ 0:00 ps ax 11038 pts/0 S+ 0:00 tail -3 ebe6737da6e8:~ # lsof -p 10924 | head -3 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME postmaste 10924 postgres cwd unknown /proc/10924/cwd (readlink: Permission denied) postmaste 10924 postgres rtd unknown /proc/10924/root (readlink: Permission denied) It only works as the user who owns the process, in this case the PID 10924 the user 'postgres': ebe6737da6e8:~ # su - postgres postgres@ebe6737da6e8:~> lsof -p 10924 | head -3 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME postmaste 10924 postgres cwd DIR 0,60 1024 10816610 /data/postgresql151/data postmaste 10924 postgres rtd DIR 0,60 1024 11934131 / postgres@ebe6737da6e8:~> Why 'root' is not allowed to do this? matthias -- Matthias Apitz, ✉ guru(a)unixarea.de, http://www.unixarea.de/ +49-176-38902045 Public GnuPG key: http://www.unixarea.de/key.pub Annalena Baerbock: "We are fighting a war against Russia ..." (25.1.2023) I, Matthias, I am not at war with Russia. Я не воюю с Россией. Ich bin nicht im Krieg mit Russland.

1 0

guide to just podman+scripts as alternative to distrobox/toolbx
by E. Castedo Ellerman 09 Nov '24

09 Nov '24

For containerized shell environments I find distrobox and toolbx too integrated and permissive. They look like great tools if one wants tight integration and to just get things working by granting lots of permissions and access. For those that want more isolation and containment for multisession shell environments into persistent containers, I've written the following guide https://cnest.readthedocs.io on how to get set up using simple scripts to call `podman`. Does anyone have advice on good places to post this guide? I've posted it on discussion.fedoraproject.org [1], but I wonder if there are additional places I should post or share. If anybody has suggestions for documenting additional related approaches I'd love to hear thoughts or what approaches other folks take. Best regards, Castedo [1] https://discussion.fedoraproject.org/t/pdated-guide-with-tutorial-for-using…

2 1

Podman candidate v5.3.0-rc3 Released
by Do Not Reply 06 Nov '24

06 Nov '24

Hi all, Podman candidate v5.3.0-rc3 is now available. You may view the full details at https://github.com/containers/podman/releases/tag/v5.3.0-rc3 Release candidate Notes: -------------- ### Features - The `podman kube generate` and `podman kube play` commands can now create and run Kubernetes Job YAML ([#17011](https://github.com/containers/podman/issues/17011)). - The `podman kube generate` command now includes information on the user namespaces for pods and containers in generated YAML. The `podman kube play` command uses this information to duplicate the user namespace configuration when creating new pods based on the YAML. - The `podman kube play` command now supports Kubernetes volumes of type image ([#23775](https://github.com/containers/podman/issues/23775)). - The service name of systemd units generated by Quadlet can now be set with the `ServiceName` key in all supported Quadlet files ([#23414](https://github.com/containers/podman/issues/23414)). - Quadlets can now disable their implicit dependency on `network-online.target` via a new key, `DefaultDependencies`, supported by all Quadlet files ([#24193](https://github.com/containers/podman/issues/24193)). - Quadlet `.container` and `.pod` files now support a new key, `AddHost`, to add hosts to the container or pod. - The `PublishPort` key in Quadlet `.container` and `.pod` files can now accept variables in its value ([#24081](https://github.com/containers/podman/issues/24081)). - Quadlet `.container` files now support two new keys, `CgroupsMode` and `StartWithPod`, to configure cgroups for the container and whether the container will be started with the pod it is part of ([#23664](htt\ ps://github.com/containers/podman/issues/23664) and [#24401](https://github.com/containers/podman/issues/24401)). - Quadlet `.container` files can now use the network of another container by specifying the `.container` file of the container to share with in the `Network` key. - Quadlet `.container` files can now mount images managed by `.image` files into the container by using the `Mount=type=image` key with a `.image` target. - Quadlet `.pod` files now support six new keys, `DNS`, `DNSOption`, `DNSSearch`, `IP`, `IP6`, and `UserNS`, to configure DNS, static IPs, and user namespace settings for the pod ([#23692](https://github.com/co\ ntainers/podman/issues/23692)). - Quadlet `.image` files can now give an image multiple times by specifying the `ImageTag` key multiple times ([#23781](https://github.com/containers/podman/issues/23781)). - Quadlets can now be placed in the `/run/containers/systemd` directory as well as existing directories like `$HOME/containers/systemd` and `/etc/containers/systemd/users`. - Quadlet now properly handles subdirectories of a unit directory being a symlink ([#23755](https://github.com/containers/podman/issues/23755)). - The `podman manifest inspect` command now includes the manifest's annotations in its output. - The output of the `podman inspect` command for containers now includes a new field, `HostConfig.AutoRemoveImage`, which shows whether a container was created with the `--rmi` option set. - The output of the `podman inspect` command for containers now includes a new field, `Config.ExposedPorts`, which includes all exposed ports from the container, improving Docker compatibility. - The output of the `podman inspect` command for containers now includes a new field, `Config.StartupHealthCheck`, which shows the container's startup healthcheck configuration. - The `podman machine list` command now supports a new option, `--all-providers`, which lists machines from all supported VM providers, not just the one currently in use. - VMs run by `podman machine` on Windows will now provide API access by exposing a Unix socket on the host filesystem which forwards into the VM ([#23408](https://github.com/containers/podman/issues/23408)). - The `podman buildx prune` and `podman image prune` commands now support a new option, `--build-cache`, which will also clean the build cache. - The Windows installer has a new radio button to select virtualization provider (WSLv2 or Hyper-V). - The `--add-host` option to `podman create`, `podman run`, and `podman pod create` now supports specifying multiple hostnames, semicolon-separated (e.g. `podman run --add-host test1;test2:192.168.1.1`) ([#2377\ 0](https://github.com/containers/podman/issues/23770)) - The `podman run` and `podman create` commands now support three new options for configuring healthcheck logging: `--health-log-destination` (specify where logs are stored), `--health-max-log-count` (specify how many healthchecks worth of logs are stored), and `--health-max-log-size` (specify the maximum size of the healthcheck log). ### Changes - Podman now uses the Pasta `--map-guest-addr` option by default which is used for the `host.containers.internal` entry in `/etc/hosts` to allow containers to reach the host by default ([#19213](https://github.com/containers/podman/issues/19213)). - The names of the infra containers of pods created by Quadlet are changed to the pod name suffixed with `-infra` ([#23665](https://github.com/containers/podman/issues/23665)). - The `podman system connection add` command now respects HTTP path prefixes specified with `tcp://` URLs. - Proxy environment variables (e.g. `https_proxy`) declared in `containers.conf` no longer escape special characters in their values when used with `podman machine` VMs ([#23277](https://github.com/containers/p\ odman/issues/23277)). - The `podman images --sort=repository` command now also sorts by image tag as well, guaranteeing deterministic output ordering ([#23803](https://github.com/containers/podman/issues/23803)). - When a user has a rootless `podman machine` VM running and second rootful `podman machine` VM initialized, and the rootless VM is removed, the connection to the second, rootful machine now becomes the default as expected ([#22577](https://github.com/containers/podman/issues/22577)). - Environment variable secrets are no longer contained in the output of `podman inspect` on a container the secret is used in ([#23788](https://github.com/containers/podman/issues/23788)). - Podman no longer exits 0 on SIGTERM by default. - Podman no longer explicitly sets rlimits to their default value, as this could lower the actual value available to containers if it had been set higher previously. - Quadlet user units now correctly wait for the network to be ready to use via a new service, `podman-user-wait-network-online.service`, instead of the user session's nonfunctional `network-online.target`. - Exposed ports in the output of `podman ps` are now correctly grouped and deduplicated when they are also published ([#23317](https://github.com/containers/podman/issues/23317)). - Quadlet build units no longer use `RemainAfterExit=yes` by default. ### Bugfixes - Fixed a bug where the `--build-context` option to `podman build` did not function properly on Windows, breaking compatibility with Visual Studio Dev Containers ([#17313](https://github.com/containers/podman/issues/17313)). - Fixed a bug where Quadlet would generate bad arguments to Podman if the `SecurityLabelDisable` or `SecurityLabelNested` keys were used ([#23432](https://github.com/containers/podman/issues/23432)). - Fixed a bug where the `PODMAN_COMPOSE_WARNING_LOGS` environment variable did not suppress warnings printed by `podman compose` that it was redirecting to an external provider. - Fixed a bug where, if the `podman container cleanup` command was run on a container in the process of being removed, an error could be printed. - Fixed a bug where rootless Quadlet units placed in `/etc/containers/systemd/users/` would be loaded for root as well when `/etc/containers/systemd` was a symlink ([#23483](https://github.com/containers/podman/issues/23483)). - Fixed a bug where the remote Podman client's `podman stop` command would, if called with `--cidfile` pointing to a non-existent file and the `--ignore` option set, stop all containers ([#23554](https://github.com/containers/podman/issues/23554)). - Fixed a bug where the `podman wait` would only exit only after 20 second when run on a container which rapidly exits and is then restarted by the `on-failure` restart policy. - Fixed a bug where `podman volume rm` and `podman run -v` could deadlock when run simultaneously on the same volume ([#23613](https://github.com/containers/podman/issues/23613)). - Fixed a bug where running `podman mount` on a container in the process of being created could cause a nonsensical error indicating the container already existed ([#23637](https://github.com/containers/podman/issues/23637)). - Fixed a bug where the `podman stop` command could deadlock when run on containers with very large annotations ([#22246](https://github.com/containers/podman/issues/22246)). - Fixed a bug where the `podman machine stop` command could segfault on Mac when a VM failed to stop gracefully ([#23654](https://github.com/containers/podman/issues/23654)). - Fixed a bug where the `podman stop` command would not ensure containers created with `--rm` were removed when it exited ([#22852](https://github.com/containers/podman/issues/22852)). - Fixed a bug where the `--rmi` option to `podman run` did not function correctly with detached containers. - Fixed a bug where running `podman inspect` on a container on FreeBSD would emit an incorrect value for the `HostConfig.Device` field, breaking compatibility with the Ansible Podman module. - Fixed a bug where rootless Podman could fail to start containers using the `--cgroup-parent` option ([#23780](https://github.com/containers/podman/issues/23780)). - Fixed a bug where the `podman build -v` command did not properly handle Windows paths passed as the host directory. - Fixed a bug where Podman could leak network namespace files if it was interrupted while creating a network namespace ([#24044](https://github.com/containers/podman/issues/24044)). - Fixed a bug where the remote Podman client's `podman run` command could sometimes fail to retrieve a container's exit code for containers run with the `--rm` option. - Fixed a bug where `podman machine` on Windows could fail to run VMs for certain usernames containing special characters. - Fixed a bug where Quadlet would reject `RemapUsers=keep-id` when run as root. - Fixed a bug where XFS quotas on volumes were not unique, meaning that all volumes using a quota shared the same maximum size and inodes (set by the most recent volume with a quota to be created). - Fixed a bug where `Service` section of Quadlet files would only use defaults and not respect user input ([#24322](https://github.com/containers/podman/issues/24322)). ### API - The Play API for Kubernetes YAML now supports `application/x-tar` compressed context directories ([#24015](https://github.com/containers/podman/pull/24015)). - Fixed a bug in the Attach API for Containers (for both Compat and Libpod endpoints) which could cause inconsistent failures due to a race condition ([#23757](https://github.com/containers/podman/issues/23757)). - Fixed a bug where the output for the Compat Top API for Containers did not properly split the output into an array ([#23981](https://github.com/containers/podman/issues/23981)). - Fixed a bug where the Info API could fail when running `podman system service` via a socket-activated systemd service ([#24152](https://github.com/containers/podman/issues/24152)). - Fixed a bug where the Events and Logs endpoints for Containers now send status codes immediately, as opposed to when the first event or log line is sent ([#23712](https://github.com/containers/podman/issues/23712)). ### Misc - Podman now requires Golang 1.22 or higher to build. - The output of `podman machine start` has been improved when trying to start a machine when another is already running ([#23436](https://github.com/containers/podman/issues/23436)). - Quadlet will no longer log spurious ENOENT errors when resolving unit directories ([#23620](https://github.com/containers/podman/issues/23620)). - The Docker alias shell script will now also honor the presence of `$XDG_CONFIG_HOME/containers/nodocker` when considering whether it should print its warning message that Podman is in use. - The podman-auto-update systemd unit files have been moved into the `contrib/systemd/system` directory in the repo for consistency with our other unit files. This message was generated by an automated system. Replies to the sender will bounce, be ignored and discarded.

1 0

Speeding up podman by using cache
by Ganeshar, Puvi 04 Nov '24

04 Nov '24

Hello Podman team, I am about explore this option so just wanted to check with you all before as I might be wasting my time. I am in Platform Engineering team at DirecTV, and we run Go and Java pipelines on Jenkins using Amazon EKS as the workers. So, the process is that when a Jenkins build runs, it asks the EKS for a worker (Kubernetes pod) and the cluster would spawn one and the new pod would communicate back to the Jenkins controller. We use the Jenkins Kubernetes pod template to configure the communication. We are currently running the latest LTS of podman, v5.2.2, however still using cgroups-v1 for now, planning to migrate early 2025 by upgrading the cluster to use Amazon Linux 2023 which uses cgroups-v2 as default. Here’s the podman configuration details that we use: host: arch: arm64 buildahVersion: 1.37.2 cgroupControllers: - cpuset - cpu - cpuacct - blkio - memory - devices - freezer - net_cls - perf_event - net_prio - hugetlb - pids cgroupManager: cgroupfs cgroupVersion: v1 conmon: package: conmon-2.1.12-1.el9.aarch64 path: /usr/bin/conmon version: 'conmon version 2.1.12, commit: f174c390e4760883511ab6b5c146dcb244aeb647' cpuUtilization: idlePercent: 99.22 systemPercent: 0.37 userPercent: 0.41 cpus: 16 databaseBackend: sqlite distribution: distribution: centos version: "9" eventLogger: file freeLocks: 2048 hostname: podmanv5-arm idMappings: gidmap: null uidmap: null kernel: 5.10.225-213.878.amzn2.aarch64 linkmode: dynamic logDriver: k8s-file memFree: 8531066880 memTotal: 33023348736 networkBackend: netavark networkBackendInfo: backend: netavark dns: package: aardvark-dns-1.12.1-1.el9.aarch64 path: /usr/libexec/podman/aardvark-dns version: aardvark-dns 1.12.1 package: netavark-1.12.2-1.el9.aarch64 path: /usr/libexec/podman/netavark version: netavark 1.12.2 ociRuntime: name: crun package: crun-1.16.1-1.el9.aarch64 path: /usr/bin/crun version: |- crun version 1.16.1 commit: afa829ca0122bd5e1d67f1f38e6cc348027e3c32 rundir: /run/crun spec: 1.0.0 +SYSTEMD +SELINUX +APPARMOR +CAP +SECCOMP +EBPF +CRIU +YAJL os: linux pasta: executable: /usr/bin/pasta package: passt-0^20240806.gee36266-2.el9.aarch64 version: | pasta 0^20240806.gee36266-2.el9.aarch64-pasta Copyright Red Hat GNU General Public License, version 2 or later https://www.gnu.org/licenses/old-licenses/gpl-2.0.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. remoteSocket: exists: false path: /run/podman/podman.sock rootlessNetworkCmd: pasta security: apparmorEnabled: false capabilities: CAP_CHOWN,CAP_DAC_OVERRIDE,CAP_FOWNER,CAP_FSETID,CAP_KILL,CAP_NET_BIND_SERVICE,CAP_SETFCAP,CAP_SETGID,CAP_SETPCAP,CAP_SETUID,CAP_SYS_CHROOT rootless: false seccompEnabled: true seccompProfilePath: /usr/share/containers/seccomp.json selinuxEnabled: false serviceIsRemote: false slirp4netns: executable: /usr/bin/slirp4netns package: slirp4netns-1.3.1-1.el9.aarch64 version: |- slirp4netns version 1.3.1 commit: e5e368c4f5db6ae75c2fce786e31eef9da6bf236 libslirp: 4.4.0 SLIRP_CONFIG_VERSION_MAX: 3 libseccomp: 2.5.2 swapFree: 0 swapTotal: 0 uptime: 144h 6m 15.00s (Approximately 6.00 days) variant: v8 plugins: authorization: null log: - k8s-file - none - passthrough - journald network: - bridge - macvlan - ipvlan volume: - local registries: search: - registry.access.redhat.com - registry.redhat.io - docker.io store: configFile: /etc/containers/storage.conf containerStore: number: 0 paused: 0 running: 0 stopped: 0 graphDriverName: overlay graphOptions: overlay.mountopt: nodev,metacopy=on graphRoot: /var/lib/containers/storage graphRootAllocated: 107352141824 graphRootUsed: 23986397184 graphStatus: Backing Filesystem: xfs Native Overlay Diff: "false" Supports d_type: "true" Supports shifting: "true" Supports volatile: "true" Using metacopy: "false" imageCopyTmpDir: /var/tmp imageStore: number: 1 runRoot: /run/containers/storage transientStore: false volumePath: /var/lib/containers/storage/volumes version: APIVersion: 5.2.2 Built: 1724331496 BuiltTime: Thu Aug 22 12:58:16 2024 GitCommit: "" GoVersion: go1.22.5 (Red Hat 1.22.5-2.el9) Os: linux OsArch: linux/arm64 Version: 5.2.2 We migrated to podman when Kubernetes deprecated docker and have been using podman for the last two years or so. Its working well, however since we run over 500 builds a day, I am trying to explore whether I can speed up the podman build process by using image caching. I wanted to see if I use an NFS file system (Amazon FSX) as the storage for podman (overlay-fs) would it improve podman performance by the builds completing much faster as of the already downloaded images on the NFS. Currently, podman in each pod on the EKS cluster would download all the required images every time so not taking advantage of the cached images. These are my concerns: 1. Any race conditions, a podman processes colliding with each other during read and write. 2. Performance of I/O operations as NFS communication will be over the network. Have any of you tried this method before? If so, can you share any pitfalls that you’ve faced? Any comments / advice would be beneficial as I need to weigh up pros and cons before spending time on this. Also, if it causes outage due to storage failures it would block all our developers; so, I will have to design this in a way where we can recover quickly. Thanks very much in advance and have a great day. Puvi Ganeshar | @pg925u Principal, Platform Engineer CICD - Pipeline Express | Toronto [Image]

2 4

Podman 5.3 Test Day 2024-11-01 through 2024-11-08
by Sumantro Mukherjee 01 Nov '24

01 Nov '24

Hey Folks! We will be testing Fedora 41 with the new update in Podman 5.3. To ensure a smooth transition, the Podman team and the Quality team of Fedora have decided to host a test day[1]. The idea is for users to test Podman 5.3 on a Fedora 41 machine and submit results in the Test Day App[2]. If you have spare cycles or use Podman as a daily driver, it will be great to have some folks try out and report bugs right away. We will want more Karmas on[3] and any following builds for Podman 5.3 [1] http://fedoraproject.org/wiki/Test_Day:2024-11-01_Podman_5.3 [2] https://testdays.fedoraproject.org/events/203 [3] https://bodhi.fedoraproject.org/updates/FEDORA-2024-50c8b12d3c -- //sumantro Fedora QE TRIED AND PERSONALLY TESTED, ERGO TRUSTED <https://redhat.com/trusted>

1 0

Podman candidate v5.3.0-rc2 Released
by Do Not Reply 31 Oct '24

31 Oct '24

Hi all, Podman candidate v5.3.0-rc2 is now available. You may view the full details at https://github.com/containers/podman/releases/tag/v5.3.0-rc2 Release candidate Notes: -------------- This is the second release candidate for Podman v5.3.0. Preliminary release notes are below. ### Features - The `podman kube generate` and `podman kube play` commands can now create and run Kubernetes Job YAML ([#17011](https://github.com/containers/podman/issues/17011)). - The `podman kube generate` command now includes information on the user namespaces for pods and containers in generated YAML. The `podman kube play` command uses this information to duplicate the user namespace configuration when creating new pods based on the YAML. - The `podman kube play` command now supports Kubernetes volumes of type image ([#23775](https://github.com/containers/podman/issues/23775)). - The service name of systemd units generated by Quadlet can now be set with the `ServiceName` key in all supported Quadlet files ([#23414](https://github.com/containers/podman/issues/23414)). - Quadlets can now disable their implicit dependency on `network-online.target` via a new key, `DefaultDependencies`, supported by all Quadlet files ([#24193](https://github.com/containers/podman/issues/24193)). - Quadlet `.container` and `.pod` files now support a new key, `AddHost`, to add hosts to the container or pod. - The `PublishPort` key in Quadlet `.container` and `.pod` files can now accept variables in its value ([#24081](https://github.com/containers/podman/issues/24081)). - Quadlet `.container` files now support a new key, `CgroupsMode`, to configure cgroups for the container ([#23664](https://github.com/containers/podman/issues/23664)). - Quadlet `.container` files can now use the network of another container by specifying the `.container` file of the container to share with in the `Network` key. - Quadlet `.pod` files now support six new keys, `DNS`, `DNSOption`, `DNSSearch`, `IP`, `IP6`, and `UserNS`, to configure DNS, static IPs, and user namespace settings for the pod ([#23692](https://github.com/containers/podman/issues/23692)). - Quadlet `.image` files can now give an image multiple times by specifying the `ImageTag` key multiple times ([#23781](https://github.com/containers/podman/issues/23781)). - Quadlets can now be placed in the `/run/containers/systemd` directory as well as existing directories like `$HOME/containers/systemd` and `/etc/containers/systemd/users`. - Quadlet now properly handles subdirectories of a unit directory being a symlink ([#23755](https://github.com/containers/podman/issues/23755)). - The `podman manifest inspect` command now includes the manifest's annotations in its output. - The output of the `podman inspect` command for containers now includes a new field, `HostConfig.AutoRemoveImage`, which shows whether a container was created with the `--rmi` option set. - The output of the `podman inspect` command for containers now includes a new field, `Config.ExposedPorts`, which includes all exposed ports from the container, improving Docker compatibility. - The output of the `podman inspect` command for containers now includes a new field, `Config.StartupHealthCheck`, which shows the container's startup healthcheck configuration. - The `podman machine list` command now supports a new option, `--all-providers`, which lists machines from all supported VM providers, not just the one currently in use. - VMs run by `podman machine` on Windows will now provide API access by exposing a Unix socket on the host filesystem which forwards into the VM ([#23408](https://github.com/containers/podman/issues/23408)). - The `podman buildx prune` and `podman image prune` commands now support a new option, `--build-cache`, which will also clean the build cache. - The Windows installer has a new radio button to select virtualization provider (WSLv2 or Hyper-V). - The `--add-host` option to `podman create`, `podman run`, and `podman pod create` now supports specifying multiple hostnames, semicolon-separated (e.g. `podman run --add-host test1;test2:192.168.1.1`) ([#23770](https://github.com/containers/podman/issues/23770)). - The `podman run` and `podman create` commands now support three new options for configuring healthcheck logging: `--health-log-destination` (specify where logs are stored), `--health-max-log-count` (specify how many healthchecks worth of logs are stored), and `--health-max-log-size` (specify the maximum size of the healthcheck log). ### Changes - Podman now uses the Pasta `--map-guest-addr` option by default which is used for the `host.containers.internal` entry in `/etc/hosts` to allow containers to reach the host by default ([#19213](https://github.com/containers/podman/issues/19213)). - The names of the infra containers of pods created by Quadlet are changed to the pod name suffixed with `-infra` ([#23665](https://github.com/containers/podman/issues/23665)). - The `podman system connection add` command now respects HTTP path prefixes specified with `tcp://` URLs. - Proxy environment variables (e.g. `https_proxy`) declared in `containers.conf` no longer escape special characters in their values when used with `podman machine` VMs ([#23277](https://github.com/containers/podman/issues/23277)). - The `podman images --sort=repository` command now also sorts by image tag as well, guaranteeing deterministic output ordering ([#23803](https://github.com/containers/podman/issues/23803)). - When a user has a rootless `podman machine` VM running and second rootful `podman machine` VM initialized, and the rootless VM is removed, the connection to the second, rootful machine now becomes the default as expected ([#22577](https://github.com/containers/podman/issues/22577)). - Environment variable secrets are no longer contained in the output of `podman inspect` on a container the secret is used in ([#23788](https://github.com/containers/podman/issues/23788)). - Podman no longer exits 0 on SIGTERM by default. - Podman no longer explicitly sets rlimits to their default value, as this could lower the actual value available to containers if it had been set higher previously. - Quadlet user units now correctly wait for the network to be ready to use via a new service, `podman-user-wait-network-online.service`, instead of the user session's nonfunctional `network-online.target`. - Exposed ports in the output of `podman ps` are now correctly grouped and deduplicated when they are also published ([#23317](https://github.com/containers/podman/issues/23317)). ### Bugfixes - Fixed a bug where the `--build-context` option to `podman build` did not function properly on Windows, breaking compatibility with Visual Studio Dev Containers ([#17313](https://github.com/containers/podman/issues/17313)). - Fixed a bug where Quadlet would generate bad arguments to Podman if the `SecurityLabelDisable` or `SecurityLabelNested` keys were used ([#23432](https://github.com/containers/podman/issues/23432)). - Fixed a bug where the `PODMAN_COMPOSE_WARNING_LOGS` environment variable did not suppress warnings printed by `podman compose` that it was redirecting to an external provider. - Fixed a bug where, if the `podman container cleanup` command was run on a container in the process of being removed, an error could be printed. - Fixed a bug where rootless Quadlet units placed in `/etc/containers/systemd/users/` would be loaded for root as well when `/etc/containers/systemd` was a symlink ([#23483](https://github.com/containers/podman/issues/23483)). - Fixed a bug where the remote Podman client's `podman stop` command would, if called with `--cidfile` pointing to a non-existent file and the `--ignore` option set, stop all containers ([#23554](https://github.com/containers/podman/issues/23554)). - Fixed a bug where the `podman wait` would only exit only after 20 second when run on a container which rapidly exits and is then restarted by the `on-failure` restart policy. - Fixed a bug where `podman volume rm` and `podman run -v` could deadlock when run simultaneously on the same volume ([#23613](https://github.com/containers/podman/issues/23613)). - Fixed a bug where running `podman mount` on a container in the process of being created could cause a nonsensical error indicating the container already existed ([#23637](https://github.com/containers/podman/issues/23637)). - Fixed a bug where the `podman stop` command could deadlock when run on containers with very large annotations ([#22246](https://github.com/containers/podman/issues/22246)). - Fixed a bug where the `podman machine stop` command could segfault on Mac when a VM failed to stop gracefully ([#23654](https://github.com/containers/podman/issues/23654)). - Fixed a bug where the `podman stop` command would not ensure containers created with `--rm` were removed when it exited ([#22852](https://github.com/containers/podman/issues/22852)). - Fixed a bug where the `--rmi` option to `podman run` did not function correctly with detached containers. - Fixed a bug where running `podman inspect` on a container on FreeBSD would emit an incorrect value for the `HostConfig.Device` field, breaking compatibility with the Ansible Podman module. - Fixed a bug where rootless Podman could fail to start containers using the `--cgroup-parent` option ([#23780](https://github.com/containers/podman/issues/23780)). - Fixed a bug where the `podman build -v` command did not properly handle Windows paths passed as the host directory. - Fixed a bug where Podman could leak network namespace files if it was interrupted while creating a network namespace ([#24044](https://github.com/containers/podman/issues/24044)). - Fixed a bug where the remote Podman client's `podman run` command could sometimes fail to retrieve a container's exit code for containers run with the `--rm` option. - Fixed a bug where `podman machine` on Windows could fail to run VMs for certain usernames containing special characters. - Fixed a bug where Quadlet would reject `RemapUsers=keep-id` when run as root. - Fixed a bug where XFS quotas on volumes were not unique, meaning that all volumes using a quota shared the same maximum size and inodes (set by the most recent volume with a quota to be created). ### API - The Play API for Kubernetes YAML now supports `application/x-tar` compressed context directories ([#24015](https://github.com/containers/podman/pull/24015)). - Fixed a bug in the Attach API for Containers (for both Compat and Libpod endpoints) which could cause inconsistent failures due to a race condition ([#23757](https://github.com/containers/podman/issues/23757)). - Fixed a bug where the output for the Compat Top API for Containers did not properly split the output into an array ([#23981](https://github.com/containers/podman/issues/23981)). - Fixed a bug where the Info API could fail when running `podman system service` via a socket-activated systemd service ([#24152](https://github.com/containers/podman/issues/24152)). ### Misc - Podman now requires Golang 1.22 or higher to build. - The output of `podman machine start` has been improved when trying to start a machine when another is already running ([#23436](https://github.com/containers/podman/issues/23436)). - Quadlet will no longer log spurious ENOENT errors when resolving unit directories ([#23620](https://github.com/containers/podman/issues/23620)). - The Docker alias shell script will now also honor the presence of `$XDG_CONFIG_HOME/containers/nodocker` when considering whether it should print its warning message that Podman is in use. - The podman-auto-update systemd unit files have been moved into the `contrib/systemd/system` directory in the repo for consistency with our other unit files. This message was generated by an automated system. Replies to the sender will bounce, be ignored and discarded.

1 0

Server down
by Morris, Adam (DELJIS) 31 Oct '24

31 Oct '24

Hello. When running "podman machine init" is says the host server (140.82.113.3:443) is failing to respond: [cid:765f8e93-8810-40ad-bd6d-9d2f9ba12c70] Can you please resolve? Thank you. Regards. -Adam

1 0