Podman candidate v5.5.0-rc1 Released
by Do Not Reply
Hi all,
Podman candidate v5.5.0-rc1 is now available. You may view the full details at
https://github.com/containers/podman/releases/tag/v5.5.0-rc1
Release candidate Notes:
--------------
### Features
- A new command has been added, `podman machine cp`, to copy files into a running `podman machine` VM.
- A new command has been added, `podman artifact extract`, to copy some or all of the contents of an OCI artifact to a location on disk.
- The `--mount` option to `podman create`, `podman run`, and `podman pod create` now supports a new mount type, `--mount type=artifact`, to mount OCI artifacts into containers.
- The `podman artifact add` command now features two new options, `--append` (to add new files to an existing artifact) and `--file-type` (to specify the MIME type of the file added to the artifact) ([#25884](https://github.com/containers/podman/issues/25884)).
- The `podman artifact rm` command now features a new option, `--all`, to remove all artifacts in the local store.
- The `--filter` option to `podman pause`, `podman ps`, `podman restart`, `podman rm`, `podman start`, `podman stop`, and `podman unpause` now accepts a new filter, `command`, which filters on the first element (`argv[0]`) of the command run in the container.
- The `podman exec` command now supports a new option, `--cidfile`, to specify the ID of the container to exec into via a file ([#21256](https://github.com/containers/podman/issues/21256)).
- The `podman kube generate` and `podman kube play` commands now supports a new annotation, `io.podman.annotation.pids-limit/$containername`, preserving the PID limit for containers across `kube generate` and `kube play` ([#24418](https://github.com/containers/podman/issues/24418)).
- Quadlet `.container` units now support three new keys, `Memory=` (set maximum memory for the created container), `ReloadCmd` (execute a command via systemd `ExecReload`), and `ReloadSignal` (kill the container with the given signal via systemd `ExecReload`) ([#22036](https://github.com/containers/podman/issues/22036)).
- Quadlet `.container`, `.image`, and `.build` units now support two new keys, `Retry` (number of times to retry pulling image on failure) and `RetryDelay` (delay between retries) ([#25109](https://github.com/containers/podman/issues/25109)).
- Quadlet `.pod` units now support a new key, `HostName=`, to set the pod's hostname ([#25639](https://github.com/containers/podman/issues/25639)).
- Quadlet files now support a new option, `UpheldBy`, in the `Install` section, corresponding to the systemd `Upholds` option.
- The names of Quadlet units specified as systemd dependencies are now automatically translated - e.g. `Wants=my.container` is now valid.
- Podman now generates events for the creation and removal of secrets ([#24030](https://github.com/containers/podman/issues/24030)).
- A new global option has been added to Podman, `--cdi-spec-dir`, to specify additional search paths for CDI specs to the CDI loader ([#18292](https://github.com/containers/podman/issues/18292) and [#25691](https://github.com/containers/podman/issues/25691)).
- The `podman build` command now supports a new option, `--inherit-labels` (defaults to true), which controls whether labels are inherited from the base image or base stages.
- The `podman update` command now supports two new options, `--env` and `--unsetenv`, to alter the environment variables of existing containers ([#24875](https://github.com/containers/podman/issues/24875)).
### Breaking Changes
- Due to changes in Docker API types, two small breaking changes have been made in the Go bindings for the REST API. The `containers.Commit()` function now returns a new struct (`types.IDResponse`) with identical contents, and the `containers.ExecCreate` function's `handlers.ExecCreateConfig` parameter now contains a different embedded struct, potentially requiring changes to how it is assigned to.
### Changes
- Podman now requires at least Go 1.23 to build.
- Healthchecks have been refactored to avoid writing to the database as much as possible, greatly improving performance on systems with many simultaneous healthchecks running.
- Healthchecks now have a new status, `stopped`, which is reported if the container the healthcheck was run on stopped before the check could be completed ([#25276](https://github.com/containers/podman/issues/25276)).
- Containers in pods are now stopped in order based on their dependencies, with the infra container being stopped last, preventing application containers from losing networking before they are stopped due to the infra container stopping prematurely.
- Due to challenges with handling automatic installation, the Windows installer no longer installs WSLv2 or Hyper-V.
- Quadlet will now print warnings when skipping lines to help identify malformed Quadlet files ([#25339](https://github.com/containers/podman/issues/25339)).
- Creating `podman machine` VMs with a host mount over the VM's `/tmp` directory is no longer allowed ([#18230](https://github.com/containers/podman/issues/18230)).
- The `podman logs` command now allows options to be specified after the container name (e.g. `podman logs $containername --follow`) ([#25653](https://github.com/containers/podman/issues/25653)).
- Podman, by default, no longer uses a pause image for pod infra and service containers. Instead, a root filesystem containing only the `catatonit` binary will be used ([#23292](https://github.com/containers/podman/issues/23292)).
- The `podman system reset` command no longer removes the user's `podman.sock` API socket.
- When using Netavark v1.15 and higher, containers in non-default networks will no longer have the default search domain `dns.podman` added. Queries resolving such names will still work.
- Stopping a Quadlet `.network` unit will now delete the network (if no containers are actively using it) ([#23678](https://github.com/containers/podman/issues/23678)).
- For security hardening, the `/proc/interrupts` and `/sys/devices/system/cpu/$CPU/thermal_throttle` paths are now masked by default in containers ([#25634](https://github.com/containers/podman/issues/25634)).
### Bugfixes
- Fixed a bug where healthchecks would still run while a container was paused ([#24590](https://github.com/containers/podman/issues/24590)).
- Fixed a bug where the remote Podman client on Windows could not mount named volumes with a single-character name into containers ([#25218](https://github.com/containers/podman/issues/25218)).
- Fixed a bug where mounting an image could panic when run without `CAP_SYS_ADMIN` ([#25241](https://github.com/containers/podman/issues/25241)).
- Fixed a bug where Podman would not report errors when setting up healthchecks ([#25034](https://github.com/containers/podman/issues/25034)).
- Fixed a bug where the `podman exec` command would not add the additional groups of the user the exec session was run as unless the user was explicitly added with the `--user` option ([#25610](https://github.com/containers/podman/issues/25610)).
- Fixed a bug where errors during the `podman network connect` and `podman network disconnect` commands could create errors in the database which would cause `podman inspect` on the container to fail.
- Fixed a bug where the `podman kube generate` command did not correctly generate YAML for volume mounts using a subpath.
- Fixed a bug where the `podman system df` command could show a negative reclaimable size.
- Fixed a bug where accessing a rootful `podman machine` VM that was not `podman-machine-default` (the default VM) with the `podman machine ssh` command would put the user into the rootless shell ([#25332](https://github.com/containers/podman/issues/25332)).
- Fixed a bug where the `podman machine init` would report nonsensical memory values in error messages when trying to create a machine with more memory than the system.
- Fixed a bug where the remote Podman client's `podman cp` command would, on Windows, often fail to copy files into the container due to improper handling of Windows paths ([#14862](https://github.com/containers/podman/issues/14862)).
- Fixed a bug where the `podman container clone` command did not correctly copy healthcheck settings to the new container ([#21630](https://github.com/containers/podman/issues/21630)).
- Fixed a bug where the `podman kube play` command would fail to start empty pods ([#25786](https://github.com/containers/podman/issues/25786)).
- Fixed a bug where the `podman volume ls` command did not output headers when no volumes were present ([#25911](https://github.com/containers/podman/issues/25911)).
- Fixed a bug where healthcheck configuration provided by a container's image could not be overridden unless the `--health-cmd` option was specified when creating the container ([#20212](https://github.com/containers/podman/issues/20212)).
- Fixed a bug where the `--user` option to `podman create` and `podman run` could not be used with users added to the container by the `--hostuser` option ([#25805](https://github.com/containers/podman/issues/25805)).
### API
- Fixed a bug where the Compat Create API for Containers ignored ulimits specified in the request when Podman was run rootless ([#25881](https://github.com/containers/podman/issues/25881)).
### Misc
- Erroneous errors from the `ExecStartAndAttach()` function in the Go bindings for the REST API have been silenced, where the function would incorrectly report errors when stdin was consumed after the exec session was stopped ([#25344](https://github.com/containers/podman/issues/25344)).
- Updated Buildah to v1.40.0
- Updated the containers/common library to v0.63.0
- Updated the containers/image library to v5.35.0
- Updated the containers/storage library to v1.58.0
This message was generated by an automated system. Replies to the sender will bounce, be ignored and discarded.
3 weeks, 1 day
Bind-Mounting a Folder Containing Git Repo Denied with Z option on macOS
by Mehdi Haghgoo
Here's my (partial) compose.yaml definition for my project:
services:
producer:
# image: docker.io/library/rabbitmq:4-management
build:
context: .
dockerfile: Containerfile.producer
env_file: env.ini
ports:
- 8080:8080
hostname: producer
volumes:
- .:/app:Z
- producer-vol:/var/lib/rabbitmq
command: python3 /app/producer.py
I have a folder for my project that contains a .git repo. When I run "docker-compose up", I get "permission denied" error.
Error response from daemon: lsetxattr /Users/mehdi/src/rabbitmq-play/.git/objects/pack/pack-de07fb2c81ced36671a7a97c6432e71e880bf618.pack: permission denied
Does anyone have experience with this error when trying to bind-mount a git repo?
- mehdi
1 month
Podman v5.4.2 Released
by Do Not Reply
Hi all,
Podman v5.4.2 is now available. You may view the full details at
https://github.com/containers/podman/releases/tag/v5.4.2
Release Notes:
--------------
### Bugfixes
- Fixed a bug where the `podman import` command could not import images compressed with algorithms other than gzip ([#25593](https://github.com/containers/podman/issues/25593)).
- Fixed a bug where the `podman cp` command could deadlock when copying into a non-empty volume on a container that is not running ([#25585](https://github.com/containers/podman/issues/25585)).
### API
- Fixed a bug where the default values for some fields in the Libpod Create endpoint for Containers did not have sensible defaults for some healthcheck fields, causing unrestricted log growth for containers which did not set these fields ([#25473](https://github.com/containers/podman/issues/25473)).
### Misc
- Updated vendored Buildah to v1.39.4
- Updated the containers/common library to v0.62.3
- Updated the containers/image library to v5.34.3
- Updated the containers/storage library to v1.57.2
This message was generated by an automated system. Replies to the sender will bounce, be ignored and discarded.
1 month, 2 weeks
