5:01 a.m.
Hi,
I'm just exploring podman and buildah, but noticed something weird; not
sure if it could be a bug or misconfiguration. But I don't know where to
look for clues as to what is happening. Sometimes when I start a container
I get a file not found error message and then 2 seconds later it starts and
runs just fine. What could be the problem? Thanks for any suggestions.
(This is a container running Fedora 30)
[bkelly@zbox ~]$ podman container start syncthing
Error: unable to start container "syncthing":
time="2019-07-04T07:23:41Z"
level=error msg="container_linux.go:346: starting container process caused
\"exec: \\\"/startup.sh\\\": stat /startup.sh: no such file or
directory\"\n"
container_linux.go:346: starting container process caused "exec:
\"/startup.sh\": stat /startup.sh: no such file or directory"
: OCI runtime error
[bkelly@zbox ~]$ podman container start syncthing
syncthing
5:17 a.m.
Hi Boyd,
thanks for reaching out!
Could you share the output of `podman info --debug` and, if possible, share
how the syncthing container has been created (e.g., the image, Dockerfile)?
Kind regards,
Valentin
On Thu, Jul 4, 2019 at 11:02 AM Boyd Kelly <bkelly(a)coastsystems.net> wrote:
Hi,
I'm just exploring podman and buildah, but noticed something weird; not
sure if it could be a bug or misconfiguration. But I don't know where to
look for clues as to what is happening. Sometimes when I start a container
I get a file not found error message and then 2 seconds later it starts and
runs just fine. What could be the problem? Thanks for any suggestions.
(This is a container running Fedora 30)
[bkelly@zbox ~]$ podman container start syncthing
Error: unable to start container "syncthing":
time="2019-07-04T07:23:41Z"
level=error msg="container_linux.go:346: starting container process caused
\"exec: \\\"/startup.sh\\\": stat /startup.sh: no such file or
directory\"\n"
container_linux.go:346: starting container process caused "exec:
\"/startup.sh\": stat /startup.sh: no such file or directory"
: OCI runtime error
[bkelly@zbox ~]$ podman container start syncthing
syncthing
_______________________________________________
Podman mailing list -- podman(a)lists.podman.io
To unsubscribe send an email to podman-leave(a)lists.podman.io
6:50 a.m.
Thanks! Please note there is stuff here I have already added to try and
figure it out. But this config did produce the error. It's inconsistently
reproducible. I was even able to get a tty and run /startup with file not
found!
[bkelly@zbox syncthing]$ cat Dockerfile
FROM fedora:30
MAINTAINER Boyd Kelly <bkelly(a)coastsystems.net>
RUN dnf -y install syncthing procps-ng iproute
ENV PUID=1000
ENV PGID=1000
RUN groupadd -g "${PGID}" syncthing && useradd -u "${PUID}" -g
syncthing -G
wheel -d /home/syncthing -s /sbin/nologin -c "Syncthing User" syncthing
RUN useradd -ms /bin/bash bkelly && usermod -aG wheel bkelly
RUN sed -i '/^#auth/s/^#//g' /etc/pam.d/su
RUN sed -e 's;^# \(%wheel.*NOPASSWD.*\);\1;g' -i /etc/sudoers
EXPOSE 8384
COPY startup.sh /
USER syncthing
CMD ["/startup.sh"]
#CMD ["/usr/bin/syncthing -no-browser -no-restart -home /var/syncthing
-gui-address 0.0.0.0:8384"]
[bkelly@zbox syncthing]$ podman info --debug
debug:
compiler: gc
git commit: ""
go version: go1.12.5
podman version: 1.4.2
host:
BuildahVersion: 1.9.0
Conmon:
package: podman-1.4.2-1.fc30.x86_64
path: /usr/libexec/podman/conmon
version: 'conmon version 0.2.0, commit:
d7234dc01ae2ef08c42e3591e876723ad1c914c9'
Distribution:
distribution: fedora
version: "30"
MemFree: 76812288
MemTotal: 2084212736
OCIRuntime:
package: runc-1.0.0-93.dev.gitb9b6cc6.fc30.x86_64
path: /usr/bin/runc
version: |-
runc version 1.0.0-rc8+dev
commit: e3b4c1108f7d1bf0d09ab612ea09927d9b59b4e3
spec: 1.0.1-dev
SwapFree: 2136981504
SwapTotal: 2218782720
arch: amd64
cpus: 4
hostname: zbox
kernel: 5.1.15-300.fc30.x86_64
os: linux
rootless: true
uptime: 5h 58m 45.26s (Approximately 0.21 days)
registries:
blocked: null
insecure: null
search:
- docker.io
- registry.fedoraproject.org
- quay.io
- registry.access.redhat.com
- registry.centos.org
store:
ConfigFile: /home/bkelly/.config/containers/storage.conf
ContainerStore:
number: 10
GraphDriverName: overlay
GraphOptions:
- overlay.mount_program=/usr/bin/fuse-overlayfs
GraphRoot: /home/bkelly/.local/share/containers/storage
GraphStatus:
Backing Filesystem: extfs
Native Overlay Diff: "false"
Supports d_type: "true"
Using metacopy: "false"
ImageStore:
number: 95
RunRoot: /run/user/1000
VolumePath: /home/bkelly/.local/share/containers/storage/volumes
[bkelly@zbox syncthing]$ cat runit.sh
#!/usr/bin/bash
podman run -d \
--userns=keep-id \
--security-opt label=disable \
--name syncthing \
-p 8384:8384 \
-v /var/data/syncthing:/var/syncthing \
syncthing
On Thu, Jul 4, 2019 at 9:01 AM Boyd Kelly <bkelly(a)coastsystems.net> wrote:
Hi,
I'm just exploring podman and buildah, but noticed something weird; not
sure if it could be a bug or misconfiguration. But I don't know where to
look for clues as to what is happening. Sometimes when I start a container
I get a file not found error message and then 2 seconds later it starts and
runs just fine. What could be the problem? Thanks for any suggestions.
(This is a container running Fedora 30)
[bkelly@zbox ~]$ podman container start syncthing
Error: unable to start container "syncthing":
time="2019-07-04T07:23:41Z"
level=error msg="container_linux.go:346: starting container process caused
\"exec: \\\"/startup.sh\\\": stat /startup.sh: no such file or
directory\"\n"
container_linux.go:346: starting container process caused "exec:
\"/startup.sh\": stat /startup.sh: no such file or directory"
: OCI runtime error
[bkelly@zbox ~]$ podman container start syncthing
syncthing
--
Boyd Kelly <bkelly(a)coastsystems.net>
www: http://www.coastsystems.net
Tel: +1 604 837-0765
8 a.m.
I swear I saw this before. Could you cat startup.sh? I think Willian forgot
the # at the beginning of script one time and it threw this error.
On Thu, Jul 4, 2019, 6:52 AM Boyd Kelly <bkelly(a)coastsystems.net> wrote:
Thanks! Please note there is stuff here I have already added to try
and
figure it out. But this config did produce the error. It's inconsistently
reproducible. I was even able to get a tty and run /startup with file not
found!
[bkelly@zbox syncthing]$ cat Dockerfile
FROM fedora:30
MAINTAINER Boyd Kelly <bkelly(a)coastsystems.net>
RUN dnf -y install syncthing procps-ng iproute
ENV PUID=1000
ENV PGID=1000
RUN groupadd -g "${PGID}" syncthing && useradd -u "${PUID}"
-g syncthing
-G wheel -d /home/syncthing -s /sbin/nologin -c "Syncthing User" syncthing
RUN useradd -ms /bin/bash bkelly && usermod -aG wheel bkelly
RUN sed -i '/^#auth/s/^#//g' /etc/pam.d/su
RUN sed -e 's;^# \(%wheel.*NOPASSWD.*\);\1;g' -i /etc/sudoers
EXPOSE 8384
COPY startup.sh /
USER syncthing
CMD ["/startup.sh"]
#CMD ["/usr/bin/syncthing -no-browser -no-restart -home /var/syncthing
-gui-address 0.0.0.0:8384"]
[bkelly@zbox syncthing]$ podman info --debug
debug:
compiler: gc
git commit: ""
go version: go1.12.5
podman version: 1.4.2
host:
BuildahVersion: 1.9.0
Conmon:
package: podman-1.4.2-1.fc30.x86_64
path: /usr/libexec/podman/conmon
version: 'conmon version 0.2.0, commit:
d7234dc01ae2ef08c42e3591e876723ad1c914c9'
Distribution:
distribution: fedora
version: "30"
MemFree: 76812288
MemTotal: 2084212736
OCIRuntime:
package: runc-1.0.0-93.dev.gitb9b6cc6.fc30.x86_64
path: /usr/bin/runc
version: |-
runc version 1.0.0-rc8+dev
commit: e3b4c1108f7d1bf0d09ab612ea09927d9b59b4e3
spec: 1.0.1-dev
SwapFree: 2136981504
SwapTotal: 2218782720
arch: amd64
cpus: 4
hostname: zbox
kernel: 5.1.15-300.fc30.x86_64
os: linux
rootless: true
uptime: 5h 58m 45.26s (Approximately 0.21 days)
registries:
blocked: null
insecure: null
search:
- docker.io
- registry.fedoraproject.org
- quay.io
- registry.access.redhat.com
- registry.centos.org
store:
ConfigFile: /home/bkelly/.config/containers/storage.conf
ContainerStore:
number: 10
GraphDriverName: overlay
GraphOptions:
- overlay.mount_program=/usr/bin/fuse-overlayfs
GraphRoot: /home/bkelly/.local/share/containers/storage
GraphStatus:
Backing Filesystem: extfs
Native Overlay Diff: "false"
Supports d_type: "true"
Using metacopy: "false"
ImageStore:
number: 95
RunRoot: /run/user/1000
VolumePath: /home/bkelly/.local/share/containers/storage/volumes
[bkelly@zbox syncthing]$ cat runit.sh
#!/usr/bin/bash
podman run -d \
--userns=keep-id \
--security-opt label=disable \
--name syncthing \
-p 8384:8384 \
-v /var/data/syncthing:/var/syncthing \
syncthing
On Thu, Jul 4, 2019 at 9:01 AM Boyd Kelly <bkelly(a)coastsystems.net> wrote:
> Hi,
>
> I'm just exploring podman and buildah, but noticed something weird; not
> sure if it could be a bug or misconfiguration. But I don't know where to
> look for clues as to what is happening. Sometimes when I start a container
> I get a file not found error message and then 2 seconds later it starts and
> runs just fine. What could be the problem? Thanks for any suggestions.
>
> (This is a container running Fedora 30)
>
> [bkelly@zbox ~]$ podman container start syncthing
> Error: unable to start container "syncthing":
time="2019-07-04T07:23:41Z"
> level=error msg="container_linux.go:346: starting container process caused
> \"exec: \\\"/startup.sh\\\": stat /startup.sh: no such file or
> directory\"\n"
> container_linux.go:346: starting container process caused "exec:
> \"/startup.sh\": stat /startup.sh: no such file or directory"
> : OCI runtime error
> [bkelly@zbox ~]$ podman container start syncthing
> syncthing
>
--
Boyd Kelly <bkelly(a)coastsystems.net>
www: http://www.coastsystems.net
Tel: +1 604 837-0765
_______________________________________________
Podman mailing list -- podman(a)lists.podman.io
To unsubscribe send an email to podman-leave(a)lists.podman.io
2387
days inactive
2387
days old
3 comments
3 participants
participants (3)
-
Boyd Kelly -
Scott McCarty -
Valentin Rothberg